Decoding Toyota part numbers

From UZZ32.info
Jump to navigation Jump to search

“ The logic for Toyota part numbers is like this (generally, with some exceptions):

1. First five digits is the component or system area that you are dealing with so in your example 31210 is a part number category that generally corresponds to the first 5 digits of a ten digit Toyota part number (PNC as we call it). These correspond most of the time, but there are sometimes where the PNC number is not the same as the first 5 digits of the ten digit number.

2. 2nd set of 5 numbers indicates the vehicle usage and indicates generational aspects of the part number (engineering changes, supplier changes, etc) (ie: -6, -61, -66, -90, -17, -54 indicate Land Cruisers). You sometimes also have applicability of numbers across vehicles (in the case of tools and oil filter etc.).

3. Sometimes you have a -77, -83, -84, -C0, etc placed after the ten digit number and those suffixes indicate things like "remanufactured, locally sourced, or color codes.

So a good example of a Land Cruiser number: 16110-61081-77: (water pump for a late 2F): Notice, for example, that the PNC is actually "16100" but the actual part for the water pump is "16110".

Hope that helps.”

“ If you have access to a complete EPC, yes, you should have no problems deriving the entire part number.

Some sites do not give you entire part number but only portions of them.

No sites will show you part supersessions because that is live information being update by TMC directly.”

“ That's the first five digits (which is also called a PNC).

The whole part number: 17501-61021

Notice that the first 5 digits in the 10 digit part number do not correspond with the PNC. That's the difference that makes it tough to decipher some things to folks new to the Toyota Part Numbering system or to folks with out EPC access.”

“ toyo DIY is *not* the complete EPC I'm presuming? It is quite extensive though and for most instances gives the correct results.”

“ For completeness.. from a nuts and bolts perspective the part number often gives the thread and fastener length details.. I have some images here that are useful for decoding those.”

“ As requested, here are some insights into understanding the Toyota part number logic for both legacy and current hardware.

There is some back ground to understand though and some of it is easier to understand than other aspects:

1. Toyota part numbers are either 10-digits or 12-digits using a combination of numerals and letters (letters come much later on...early 2000's). The hyphen is used for readability.​

2. A 10-digit Toyota part number is broken up into two sections: Prefix 5-digit number and suffix-5 digit number. For our purposes in discussion hardware, all of them will begin with 9 and look like this: 9xxxx-xxxxx​

3. Hardware specific to different systems (AC, electrical, etc.) will have their own numbers. For example, the AC idler adjusting bolt is 88446-35040. This bolt is not "standard" or "semi-standard" hardware. This bolt is specific to the AC system (88446) and it is even more specific to the R engine family (35040) and is used in the 1FZ-FE engine family as well (a good example of how Toyota re-uses old designs rather than re-design a new part when an old one will work just fine).​

Another good example: 81119-1A270: Headlight adjusting bolt (2 per headlight) for an FJ60. The first 5 digits indicate the headlight system (81119). This is a specific piece of hardware manufactured specifically for this application, thus it is out side of the normal scope of standard or semi-standard hardware.​

For legacy hardware (so basically everything from the 4x time period with a bit of 6x/7x truck legacy), the breakdown of the first 3 digits of the first 5 prefix digits goes like this:

1st condition: will always start with 9 2nd condition: will be a number from 0-9, A-Z 3rd condition: will be a number from 0-9

2nd condition definitions:

0= Standard hardware 1= Hexagonal head bolts 2= Bolt 3= Screw 4= Nut and washers 5= Rivet, pin, key, nail, etc. 6= Fastening plate, fitting seal, cushion, hose clamp 7= Roller bearing (anti-friction)f 8= Tire and tube 9= functional parts A-Z= serial in meaning and position; usually based on Toyota engineering application as provided by Toyota supplier

3rd condition definitions (a sub-category of the 2nd condition definitions):

900= Manufacturer semi-standard parts (same as 1-9 from 2nd condition but meant for Toyota suppliers) 909= Special semi-standard parts (think 3.5mm vacuum hose: 90999-92003 for example)

911= Hex head bolt (Class 1) 912= Hex head bolt (Class 2) 913= Hex head bolt (Class 3) 914= Hex head bolt (Class 4)

921= Stud 927= Square head bolt, flat head bolt, hex socket head bolt 928= Cup square neck bolt, Flat square neck bolt


931= Slotted screw 932= Cross-recessed screw 935= Cross-recessed tapping screw 936= Slotted wood screw 937= Cross-recessed wood screw

941= Hexagon nut 942= Nut 943= Plate nut 944= Part with nut 945= Spring washer 946= Plate washer 947= Seal washer

951= Rivet 952= Nail 953= Pin 955= Key

961= Fasteners 963= Pipe fittings 964= Fittings 966= Oil seal, dust seal 967= oring 968= cushion

971= single row, deep groove, ball bearing 972= magnet ball bearing 973= angular ball bearing 974= double-row, self-aligning ball bearing 975= cylindrical roller bearing 976= tapered roller bearing (JIS) 977= tapered roller bearing (Timken) 978= spherical roller bearing

980= tire and tube set 981= tire 982= tube 983= rim band 984= flat 985= tubeless tire

991= switches, alarms, lighting equipment, wires, batteries 992= spark plug

So, example: 91112-41220=

91= standard hexagon head bolt 1= hexagon head bolt class 1 1= effective diameter bolt 2= flat threaded end (-) 4= 4T (bolt tensile strength) 12= Thread diameter 12mm 20= length under head 20mm

Or, put another way:

Hardware part number: "ABCDE-FGHIJ"

AB= Initial digits of semi-standard part number (90xxx series) or standard part number (91xxx through 99xxx series) C= Item nomenclature description type D= effective diameter E= rough finish (-) F= tensile strength GH= thread diameter in mm IJ= length under head in mm

Now, in the mid-1980's and into the 1990's and continuing today, Toyota part numbering has gotten more and more complicated on the surface.

What has actually happened is that there has been a reduction in part numbers through the process of discontinuation, regionalization of manufacture and part numbering, as well as superseding a number of different part numbers into a new part number (this last one is especially true for semi and standard hardware).

A new part number prefix has also developed that now encompasses many different pieces of hardware with no ostensive logic. These are the 90080 prefix numbers. These are mainly North American manufactured parts (though not exclusively) that replace parts that used to arrive via boat from Japan. So, some examples:

90917-06065 is a down-pipe to manifold "donut" gasket. This is a Japan manufacture part that follows the internal semi-standard part numbering logic. For the US, Toyota superseded the part to a local production part and gave it the following part number: 90080-43036. This part number says nothing about the part or where it lives or what it does.

See here this part number as well: 90179-10070 is a lock nut used on down-pipe to manifold mating studs. This is a Japan manufacture part that follows the internal semi-standard part numbering logic. For the US, Toyota superseded the part to a local production part and gave it the following part number: 90080-17187. This part number says nothing about the part or where it lives or what it does.

Same for this example: Spark plugs have historically been 90919-XXXXX. So, for example, 90919-01210 is the factory part number (generally called the "engineering part number") for a spark plug for a UZJ100 (2UZ-FE engine) Land Cruiser. This is a Japan manufacture part that follows the semi-standard part numbering logic. For the US, Toyota superseded the part to a local production part and gave it the following part number: 90080-91180. This part number says nothing about the part or where it lives or what it does.

Now, when it comes to the 90080-XXXXX part numbers, there is obviously (like everything to do with Toyota) some logic that is internal and is not something that is now available to even Toyota parts professionals. One just has to remember the number and know that it is a supersession of a formerly Japan manufacture part. There is unfortunately no other way to decipher these parts numbers as there is no external, ostensive logic to them.

Anyway, the above is part of a much larger project/document I am working on that explains--in minute detail--the entire Toyota parts procurement, engineering, numbering and application world.

Hope this helps.

Best. -onur”

Source:

Retrieved from "https://www.uzz32.info/mw/index.php?title=Decoding_Toyota_part_numbers&oldid=6977"