Field AH-5 Height Controller for UZZ31

Although 3rd party height controllers such as the Field AH-5 are readily available for UZZ31 Soarers, they do not appear to be compatible with UZZ32 Soarers.

Error creating thumbnail: Unable to save thumbnail to destination

Wiring appears to consist of:

• 4 inputs
• 4 outputs
• power
• ground

Power and ground pins are spliced into the existing circuit. The others appear to be a case of diverting the 4 x sensor inputs into the controller and then sending the (modified) values into the Soarer's suspension controller.

• PIN B2 (Purple wire) - SHFR = Suspension Height Front Right ?
• PIN B3 (Pink wire) - SHRR = Suspension Height Rear Right ?
• PIN B10 (Green wire) - SHFL = Suspension Height Front Left?
• PIN B11 (Blue wire) - SHRL = Suspension Height Rear Left ?
• PIN A14 (Black wire) - assumed to be earth but does not seem to match with diagram
• PIN A8 (Red wire) - assumed to be ignition but does not seem to match with diagram

All other wires appear to be straight pass-through for connectors A and B, except for the handful of pins (A7, A18, A19, A21 and B4) that are not used. Connectors C and D are not used at all by this controller.

References that may assist those considering building their own controllers include:

• http://members.westnet.com.au/rbaird/SuspensionCodes.pdf
• http://planetsoarer.com/UZZ32/activecomputer.pdf
• http://www.alscarchive.com/cgi-bin/discus/discus.cgi?pg=prev&topic=3&page=50270
• http://soarercentral.com/sc-forum/messages/30604/386652.html?1428138901
• http://www.soarerworld.com/forum/showthread.php?15230-need-a-cd-unit/page2
• http://soarercentral.com/sc-forum/messages/3442/9504.html?1124570701
• http://soarercentral.com/sc-forum/messages/30604/115896.html
• http://soarercentral.com/sc-forum/messages/30604/118491.html?1165399075
• http://soarercentral.com/sc-forum/messages/4570/261354.html